Use device management tools, Embedded web server, To open the embedded web server – HP Officejet Pro L7380 All-in-One Printer User Manual

Page 94: Toolbox (windows), To open the toolbox toolbox tabs, Hp printer utility (mac os), Myprintmileage, To open the

Advertising
background image

Use device management tools

Embedded Web server

Toolbox (Windows)

HP Printer Utility (Mac OS)

Network Printer Setup Utility (Mac OS)

HP Web Jetadmin software

HP Instant Support

myPrintMileage

Embedded Web server

When the device is connected to a network, you can use the embedded Web server to
view status information, change settings, and manage it from your computer.

NOTE:

For a list of system requirements for the embedded Web server, see

Embedded Web server specifications

.

Some settings might be restricted by the requirement for a password.
You can open and use the embedded Web server without being connected to the
Internet; however, some features will not be available.

To open the embedded Web server
You can open the embedded Web server by using these methods:

NOTE:

To open the embedded Web server from the printer driver (Windows), or

the HP Printer Utility (Mac OS), the device must be on a network and must have an
IP address.

Web browser: In a supported Web browser on your computer, type the IP address
that has been assigned to the device.
For example, if the IP address is 123.123.123.123, type the following address into
the Web browser:

http://123.123.123.123

The IP address for the device is listed on the self-test diagnostic page. For more
information, see

Understand the network configuration page

.

After opening the embedded Web server, you can bookmark it so that you can
return to it quickly in the future.

HP Printer Utility (Mac OS): On the Printer Settings panel, click Additional
Settings
, and then click the Open Embedded Web Server button.

Chapter 9

90

Configure and manage

Advertising