HP Officejet Pro L7380 All-in-One Printer User Manual

Page 115

Advertising
background image

To set up the device with voice mail
1.
Using the phone cord supplied in the box with the device, connect one end to your

telephone wall jack, then connect the other end to the port labeled 1-LINE on the
back of the device.

NOTE:

If you do not use the supplied cord to connect from the telephone wall

jack to the device, you might not be able to fax successfully. This special
phone cord is different from the phone cords you might already have in your
home or office.

2. Turn off the Auto Answer setting.
3. Run a fax test.
You must be available to respond in person to incoming fax calls, or the device cannot
receive faxes.

Case G: Fax line shared with computer modem (no voice calls received)
If you have a fax line on which you receive no voice calls, and you also have a
computer modem connected on this line, set up the device as described in this section.

NOTE:

If you have a computer dial-up modem, your computer dial-up modem

shares the phone line with the device. You will not be able to use both your modem
and the device simultaneously. For example, you cannot use the device for faxing
while you are using your computer dial-up modem to send an e-mail or access the
Internet.

Set up the device with a computer dial-up modem

Set up the device with a computer DSL/ADSL modem

Set up the device with a computer dial-up modem
If you are using the same phone line for sending faxes and for a computer dial-up
modem, follow these directions for setting up the device.

Figure 9-6 Back view of the device

Set up faxing for the device (some models only)

111

Advertising