The device cannot read the memory card, The device cannot read photos on the memory card – HP Officejet Pro L7380 All-in-One Printer User Manual

Page 190

Advertising
background image

NOTE:

If you are starting a memory card operation from a computer, see the

software Help for troubleshooting information.

The device cannot read the memory card

Check the memory card

Make sure that the memory card is one of the supported types. For Compact
Flash II - solid state memory only. For more information, see

Insert a memory

card

.

Some memory cards have a switch that controls how they can be used. Make
sure that the switch is set so that the memory card can be read.

Inspect the ends of the memory card for dirt or material that closes a hole or
spoils a metal contact. Clean the contacts with a lint-free cloth and small
amounts of isopropyl alcohol.

Assure that the memory card is working properly by testing it with other devices.

Check the memory card slot

Make sure that the memory card is fully inserted into the correct slot. For more
information, see

Insert a memory card

.

Remove the memory card (when the light is not blinking) and shine a flashlight
into the empty slot. See if any of the small pins inside are bent. When the
computer is off, you can straighten slightly bent pins by using the tip of a thin,
retracted ballpoint pen. If a pin has bent in such a way that it touches another
pin, replace the memory card reader or have the device serviced. For more
information, see

Support and warranty

.

Make sure that only one memory card has been inserted at a time in the slots.
An error message should appear on the control-panel display if more than one
memory card is inserted.

The device cannot read photos on the memory card

Check the memory card

The memory card might be corrupt.

The photos might be in a format that is not recognized. An error message should
appear on the control-panel display if the format is unrecognizable. Use the
procedure for printing photos from the control panel, because more formats might
be recognized. For more information, see

Print photos from the control panel

. If the

device is connected to a computer, you can save the photos from the memory card
to your computer and then print them from a software program.

Some photos on the memory card will not print, causing the print job to cancel

Check the photo files
Print a proof sheet and note which photos are corrupt. Set up the print job so that it
does not include the corrupted photos. For more information, see

Print photos using a

proof sheet

.

Chapter 10

186

Maintain and troubleshoot

Advertising