Rack mounting hardware kit contents, Converting rails for round-hole racks – HP 60-Modular-Smart-Array User Manual
Page 16
Setup 16
Rack mounting hardware kit contents
The rack mounting hardware kit provides the required components for quick deployment in Compaq
branded, HP branded, and most square- and round-hole third-party racks. The adjustable feature of the
rack rails enables installation in racks with depths of 69.90 to 76.2 cm (27.52 to 30.00 in).
If you are installing the MSA60 in an M-Series rack, contact an authorized reseller to obtain an M-Series
Rack Rail option kit.
Item Description
1
Rack rail (left)
2
Rack rail (right)
3
Pins for round-hole rack conversion (8)
In addition to these supplied items, you may need a No. 2 Phillips screwdriver.
Converting rails for round-hole racks
The rack rails ship configured for square-hole racks. To convert the rack rails for use in a round-hole rack:
1.
Locate the bag of miscellaneous hardware that ships with the rack rails.
2.
Locate the eight round-hole pins.