HP StoreEver ESL G3 Tape Libraries - Manual (Page 225)

Table 49 Enrolling ESL G3 with a KMIP Server (continued)
Comment
Primary document(s)
providing more detail
Description of task Step
Import the files from steps 3
and 4. HP StoreEver Enterprise
Systems Library (ESL) G3
Tape Library User Guide Install certificates on the ESL
G3.
2
6
Enter the IP addresses from
step 1. HP StoreEver Enterprise
Systems Library (ESL) G3
Tape Library User Guide Tell ESL G3 about the
servers.
2
7
Enable encryption on a
per-partition basis. HP StoreEver Enterprise
Systems Library (ESL) G3
Tape Library User Guide Enable encryption on ESL
G3 partitions.
2
8
A general description for a
test you can use to verify HP StoreEver Enterprise
Systems Library (ESL) G3 End to end verification test. 9
encryption is working, and Tape Library User Guide
to verify keys can be and Server vendor's
delivered from all nodes of
the key management cluster. Integration Guide for ESL
G3
1
This is the HP license needed to enable the KMIP feature on ESL G3. The KMIP server vendor may require a separate
KMIP license, which would be installed in step 1. Contact your server vendor if you have questions about server-side
licenses.
2 If the ESL G3, and the ESL G3 installation service, and the KMIP license SKU (B4J73A) are purchased at the same time,
these steps will be performed as part of the installation service.
Figure 32 Enrolling ESL G3 with a KMIP Server
NOTE: HP does not supply the KMIP server. If you are not familiar with configuring your KMIP
server, please contact your KMIP server vendor.
KMIP Configuration 225