HP StoreEver ESL G3 Tape Libraries User Manual
Page 96
4.
To prevent guest login privileges on the library, click Disable Guest Login. You can toggle
between Disable Guest Login and Enable Guest Login.
NOTE:
For a list of commands that are available to users logging on to the library as a
guest, see
.
5.
To create a user account, click Create.
The Local Users - User Account Type dialog box appears.
6.
In the Enter User Name text box, type a user name.
NOTE:
User accounts with the names guest, admin, and service are reserved. You
cannot use these names for user accounts.
7.
In the Enter Password text box, type a password.
NOTE:
Passwords that are most secure include a combination of letters, numbers, and
non-alphanumeric characters. Passwords must be eight or more characters in length. The word
password
is not available for use.
8.
In the Confirm Password text box, type the password again.
9.
For Select Privilege, select a privilege level (Administrator or User).
NOTE:
For a list of commands that are available to administrators and users, see
10.
Perform one of the following tasks:
•
If you selected Administrator, the Finish button becomes available. To register your user
account selections, click Finish, and then skip the remaining information in this procedure.
•
If you selected User, click Next.
The Local Users - User Account Type - Assign Partitions dialog box appears.
11.
On the Local Users - User Account Type - Assign Partitions dialog box, select the check boxes
to the left of the libraries to which you want the user to have access, or select the Select All
check box to give the user access to all listed libraries.
12.
To register your user account selections, click Finish.
96
Operating the library