HP Deskjet 695c Printer - Manual (Page 12)

12
Installing from Disks
Windows 95, Windows 98, and Windows 3.1x
6
Insert Disk 1 into the disk drive.
7
Windows 95 and Windows 98 users: click Start on the
taskbar and then click Run.
Windows 3.1x users: in the Program Manager, click
File, and then click Run.
8
Type a:\setup and click OK.
If your disk drive is assigned to a letter other than “a”, type that
letter instead.
9
When the opening screen appears, click Install the
HP DeskJet 690C Series Software on your PC and
follow the instructions on the screen.
If something goes wrong, see page 14.
10
When the installer instructs you to restart Windows,
the installation is complete. Remove the disk from
your disk drive and restart Windows.
11
When the Communication Test dialog box appears,
click Test.
12
Do one of the following:
•
If the test is successful, skip the rest of this section and go to
page 15.
•
If the test is not successful, click Troubleshoot and try to correct
this problem. If you cannot correct this problem, click OK. For
more information about printer communications, see page 13.