What if – HP Deskjet 695c Printer User Manual
Page 45
26
What If
The banner has a big
gap or a crease where
you don’t expect it
The printer may be picking
up more than one sheet of
paper at a time. Take the
paper out and then unfold
and refold the stack. Make
sure you have at least 10
sheets of paper in the
printer. Also be sure the top
and bottom margins are set
to zero in your banner
program. Print it again.
The printer jams while
printing the banner
●
You did not select
Banner in the HP print
settings dialog box.
Follow the directions in
step 2 on page 25, and
try printing again.
●
Try putting in more
than 10, but less than 20
sheets of paper into the
lower (IN) tray.
●
Make sure the banner
support is up.
ᕤ
Remove all paper from the lower (IN) tray and flip up the banner support in the
upper (OUT) tray.
ᕥ
Get the banner paper ready for the printer:
●
From the stack of banner paper, tear off at least one more sheet than
you need to print the banner. The stack of banner paper must contain
a minimum of 10 sheets.
●
Tear off the perforated strips, if any exist.
●
Unfold and refold the stack so the pages don’t stick together in the
printer.
Flip up the banner support.