Install the printer software – HP Deskjet 695c Printer User Manual

Page 8

Advertising
background image

8

6

Install the printer
software

Before you can use your new HP DeskJet printer, you must install the
printer software. HP recommends that you install from the CD. If your
computer does not have a CD-ROM drive and disks were not included
with your printer, see page 49 in the user’s guide for information on
obtaining printer software.

To ensure successful installation of the
printer software:

1

Make sure your computer is fully set up and
operational.

2

Check that the printer is properly set up and ready
to print using the instructions in this setup guide.

3

Make sure that the printer is connected directly to
the computer (remove any switch boxes or other
devices using the same port) and check that all
cable connections are firm.

4

Make sure the computer and the printer are turned
on.

5

Close any virus protection programs or other
software programs that are running on your computer
(see page 13 for instructions).

Beginning on page 9, follow the installation instructions for the
operating system on your computer.

Advertising