HP Parallel Uninterruptible Power System - Manual (Page 102)

Specifications 102
Cord model number Description Input plug type Length
12kVA Parallel NA 12 kW UL parallel Anderson 0.5 m (1.5 ft)
12kVA INTL 12 kW CE input IEC 309-32 A 3.7 m (12 ft)
8kVA INTL 12 kW CE input/output IEC 309-16 A 3.7/1.2 m (12/4 ft)
12kVA Parallel INTL 12 kW CE parallel Anderson 0.5 m (1.5 ft)
Power Bus Bar and Wireway specifications
Power Bus Bar Wireway
Dimensions (WxDxH) 14.0 x 11.3 x 182.7 cm (5.5 x 4.4 x 71.9 in)
Weight
19 kg (42 lb) 20 kg (45 lb)
UPS connections 6 power connections available
Rack placement Installed to the rack rear vertical rail
(pre-installed)
Fits into the bottom 6U of standard
rack space (pre-installed)
HP 10642 G2 Rack specifications
U height Width Depth Weight (without
side panels)
Dynamic load (gross) Static load
42U 600 mm
(23.8 in)
1,000 mm
(39.4 in)
115 kg (253 lb) 907.2 kg (2,000 lb) 907.2 kg (2,000
lb)
UPS input specifications
3 Phase UPS NA 3 Phase UPS INTL
Nominal voltage 120/208 V three-phase 230/400 V three-phase
Nominal frequency 50/60 Hz 50/60 Hz
Frequency range 45-65 Hz 45-65 Hz
Default frequency Auto-detected Auto-detected
Rated input current—12kVA
models 36 A 24 A
Rated input current—8kVA
models 24 A 16 A
Connections—12kVA models IEC 309-60 A power cord
IEC 309-32 A power cord
Connections—8kVA models L21-30P power cord IEC 309-16 A power cord
Connections—Parallel models Single Anderson input/output cord
connects to the Power Bus Bar
Single Anderson input/output cord
connects to the Power Bus Bar
Noise filtering MOVs and common mode line filter MOVs and common mode line filter
Input power factor High efficiency setting: load
dependent
High efficiency setting: load dependent
Standard setting: >0.99 Standard setting: >0.99
Input mode Three-phase Three-phase