Faceplate leds – Ag Leader Base Station Hardware Manual User Manual
Page 33
Hardware Installation Manual
31
Faceplate LEDs
Faceplate LEDs
The LED display indicates system status. The specific symbols and meanings are listed in Table 3-2 (from bottom left to
right).
Figure 3-5
AFLink Mobile Base Station Faceplate
Table 3-2
LED Display Function Definition
Sym
Meaning
Display
RX
Receive (reserved)
Reserved for future use.
TX
Transmit (data out to the vehicle)
Blinks as data is transmitted. This can also be
steady/green if the data flow is continuous.
NSV
# of GPS satellites (count = 1-12)
Blinks the number of satellites, then pauses before
counting them again.
SR
Service receive (modem / RS-232)
Reserved for diagnostics.
ST
Service transmit (modem / RS-232)
Reserved for diagnostics.
BOK
Base unit is OK/active; requires a minimum of four
satellites.
Steady/green [ON] indicates you can start working
on jobs.
PPS
Pulse per second (synchronized to GPS time)
Blinks once per second.
PWR
Power
Steady/green [ON] indicates the power is on.