Ag Leader Base Station Hardware Manual - Manual (Page 68)

66 AutoSteer System
Assembling the Repeater
Assembling the Repeater
1. Assemble the Radio Modem Bracket Assembly as shown in the diagram. The U-bolts and Washer are to be used later if
necessary. The final assembly is shown on the right.
2. Attach the A5 Repeater Radio Modem to the Radio Modem Bracket Assembly using the four screws provided.
3. Attach the Radio Modem Antenna to the back of the Radio Modem Bracket Assembly and tighten the bolts that secure it to
the bracket.
4. Connect the Repeater Modem Antenna Cable to the bottom of the Radio Modem Antenna on one end and to the top of the
Repeater Radio Modem on the other end.
5. Connect the Repeater Power Cable to the bottom of the Repeater Radio Modem.
3. Repeater Bracket Assembly 200-0334-01
4. Antenna 500-0006-01
5. AFLink Radio 201-0246-01
Part Description Part Number