Ag Leader Base Station Hardware Manual - Manual (Page 36)

34 AutoSteer System
Providing Power
8. Attach the radio modem mounting bracket to one of the Tripod legs so that the radio modem is mounted with the label
upright.
9. Connect the Radio Modem Antenna Cable to the radio modem.
Note: Once the two Quick-Release Couplers are attached to their respective components, keep them intact and press
the Female Quick-Release Coupler button to move the Base Station on and off the Tripod.
Providing Power
1. Fasten the power cable to the bottom of the Base Station. Do not force the cable connector into the power cable plug-in.
Align the widest, single notch of the connector with the matching slot on the plug-in port.