AMX VTM-D15/A - Manual (Page 20)

Installation and Wiring
16 VTM-D15/A 15" MultiMedia Touch Panel Systems
2. Attach and secure the monitor portion of the Wall Mount Bracket (arrow side up) to the rear
of the monitor using the four provided screws.
3. Select a location on the wall for the Surface Mount Bracket to be located. Once the panel is on
the wall, the cables can be routed through the wall or along it. The wiring length would be
restricted by the length of the cables that come with the touch panel.
4. Attach the Surface Mount Bracket to the surface/wall at the indicated drill locations by using
the four expansion screws (FIG. 14).
FIG. 12 Surface Mounting Kit (VTM-WMB) contents
FIG. 13 Attaching the Surface Mount Bracket to the rear of the panel
FIG. 14 Attaching the Surface Mount Bracket
Monitor Bracket
Screws
(4)
Surface Mount Bracket
Screws
(4)
Monitor Bracket
Surface Mount
(4)
Expansion
Slot
Screws
Bracket
Mounting hole
dimensions for
for Surface Mount
Bracket