AMX VTM-D15/A - Manual (Page 6)

MultiMedia Touch Panel
2 VTM-D15/A 15" MultiMedia Touch Panel Systems
Power Adapter
Connects to the Power Cord in order to supply power to the
VTM-D15/A touch panel.
Power Cord
Connects to the Power Adapter in order to supply power to
the VTM-D15/A touch panel.
15-pin DB15 VGA Signal Cable
Provides a video signal from the video source to the rear of
the VTM-D15/A touch panel.
8-pin Mini Din to 9-pin DB9 Touch Panel Signal Cable
Provides a touchscreen signal from the VTM-D15/A touch
panel to the panel interface.
Touch Screen Support Bracket and screws
(Table Top Panel ONLY)
Provides upright support for the VTM-D15/A touch panel
when placed on a flat level surface.
VTM-WMB Surface Mount Support Bracket and screw
(ONLY available with either the VTM-D15/ASB system or
stand alone VTM-d15/AB Surface Mount Panel)
Provides support for the VTM-D15/A touch panel when
attached to a vertical surface.
CD-ROM
Provides the touchscreen drivers that are used with the
touch panel.
DB-9 (on COM1/2)
8-pin mini-DIN
(on rear of panel)
Cont.