EOTech LWTS Light Weapon Thermal Sight - Manual (Page 34)

2-16
2.13 POLARITY
NOTE
In CLIP ON mode (see section 2.24), WHOT HOT
polarity is displayed as WHT, and BLK HOT
polarity is displayed as BLK.
Pressing the POL/AGC button toggles the polarity setting
between white hot and black hot modes. The selected mode
(WHT HOT or BLK HOT) is presented in the upper left
corner of the eyepiece display (see Figure 2-10). In WHT
HOT mode, objects with the hottest thermal signature will
appear white and those with the coolest signature will
appear black. In BLK HOT mode, the reverse is true.
2.14 FIELD OF VIEW (FOV)
NOTE
In CLIP ON mode (see section 2.24), the field of
view option is automatically set to WFOV. When
in CLIP ON mode, pressing the FOV/MODE
button has no effect on the field of view setting.
When in STAND ALONE mode (see section 2.24) only,
pressing the FOV/MODE button toggles between the wide
field of view (WFOV) and narrow field of view (NFOV)
settings. An FOV Indicator is presented in the upper right
corner of the eyepiece display as shown in Figure 2-10. The
FOV Indicator consists of the letter W (WFOV) or N (NFOV)
preceding the selected weapon reticle.
Additional confirmation that the LWTS is placed in WFOV is
provided by the WFOV Brackets shown in Figure 2-10. The
area contained within the WFOV Brackets provides an
approximation of the field of view that will be visible in the
eyepiece display when switching to NFOV. In NFOV, the
WFOV Brackets are not displayed.