HUACAM HCV207 User Manual
Page 11
www.huacam.com 11
NOTE:
Please temporarily disable Antivirus or Internet Security Software when download and install
the Huacam Firefox plug-in for video or “HCViewerX.cab” for Microsoft Internet Explorer.
Connect to the Camera using Static IP
If no DHCP server in the network, or the camera does not get IP from DHCP server, user can
connect the camera to a computer directly, using static IP to configure the camera.
The default IP, if no DHCP server; or DHCP offer time out (3 minutes), is 192.168.1.168
1. Connect the computer RJ-45 via an Ethernet cable directly to the IP camera HCV207.
2. Configure the computer using Static IP: 192.168.1.XXX (1<XXX<255, but NOT 168) and
configure the “Subnet mask” to “255.255.255.0”. Leave the “Default Gateway” to “Blank” like
below:
3. Power on the HCV207.
4. Start the IE or Firefox browser when the network connection is up.
5. Enter 192.168.1.168 in the address bar of the browser.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page
and start to show the video captured by the camera (by default the camera enabled anonymous