HUACAM HCV207 - Manual (Page 4)

www.huacam.com 4
1.1 Safety Compliances
These instructions are intended to assist users with the operation of the HCV207 and also to
instruct on how to avoid dangerous situations or damage to the device.
Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
Cautions: Injury or damage to the equipment may occur if any of the following caution messages
are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to prevent
potential injury or material damage.
Warnings:
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with DC 12V according to the IEC60950-1 standard. Please refer to the technical
specifications for more details.
Do not use a third-party power adapter or power cord
When the device is installed on the wall or ceiling, make sure that it is firmly attached.
Notice：
— Make sure that the power supply voltage is correct before using the camera.
— Do not drop the device or expose it to physical shock.
— Do not expose the device to temperatures outside the range of -30 oC to +50oC PSU when
the device is in operation.
— Do not expose the device to high electromagnetism radiation.
— To avoid heat accumulation, make sure that your operating environment has proper
ventilation.
— Do not attempt to open, disassemble, or modify the device
— A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly
according to their average life time. The average life time varies from the differences
between operating environments and usage history. Regular maintenance checks are
recommended for all users. Please contact your dealer for more details.