HUACAM HCV207 User Manual
Page 17
www.huacam.com 17
Audio Settings:
Pull down to disable due to no microphone in this camera.
• Microphone Volume
: Slide to adjust microphone gain.
• Speaker Volume:
Slide to adjust the built-in speaker volume.
Power Frequency: Select correct local power frequency to avoid video flicking effect
under fluorescence light condition. Default is Outdoor.
Figure 4-2: Video & Audio Settings Page
Primary Stream Settings:
•
Preferred Video Codec:
MJPEG and H.264 supported, H.264 recommended.
•
Resolution:
The video resolution in pixels used in video of camera
•
Bit Rate:
video bit rate used
•
Maximum Frame Rate:
Maximum frame rate used. More data if big frame used
•
Bit Rate Control:
Constantly bit rate, or variable bit rate
•
Image Quality:
Image quality used when Variable Bit Rate used
•
I-frame Interval:
I-frame interval
Secondary Stream Settings: Pull down to select, same as Primary steam..