ACS EXP-06E - Manual (Page 4)

EXP-06E Access Control System Installation Instruction
Satcom Systems (International) Co., Ltd.
4
3. EXP-06E Access Controller Configuration
I/O Capacities
IN Reader ----------------------------- 1
IN Keypad ----------------------------- 1
OUT Reader ----------------------------- 1
Electric Door Lock Output ----------------------------- 1
Auxiliary Relay Output ---------------------------- 1
Programmable Relay Output ---------------------------- 1
Parallel Printer Port ----------------------------- 1
Door Release Button Input ----------------------------- 1
Door Sensor Input ----------------------------- 1
RS232 Communication Interface ----------------------------- 1
RS485 Communication Interface ----------------------------- 1
Memory Capacities
Cardholders & Transactions --------------------------- 16,000
Access Time Zone --------------------------- 9
Pin Entry Time Zone --------------------------- 3
Cardholder Authority Levels --------------------------- 3
Holidays --------------------------- 100
IN Reader : Can be using LED Indication Lamp with Keypad
OUT Reader : Only LED Indication Lamp
System Characteristics
Multiple Technologies:
Supports Proximity and Magnetic Stripe Card
Selectable Acceptance Entrance Mode:
Card Only, Pin Code Only, Card + Pin Code
Complete Standalone:
Do not depend on other equipment for operation and programming.
Distributed Data:
Memory and processing located at every door. No degraded mode.
Optional Remote Terminal:
The optional remote terminal can be used for alarm monitoring and selected system
commands. The terminal can be located a few away or across the country via
modems.