ACS EXP-06E - Manual (Page 6)

EXP-06E Access Control System Installation Instruction
Satcom Systems (International) Co., Ltd.
6
6. User Card Operation Procedures
6.1 Present Card Only
Place the card on the present card area. If the entrance is permitted, the proximity card
reader will sound a long "beep". Then the door lock will be released with a certain
time defined by supervisor. If prohibited, by "INVALID CARD" (Invalid Card
Number) or "WRONG ACCESS" (Invalid Anti-Passback) or "WRONG LEVEL"
(Invalid Access Time Zone) the proximity card reader will sound three sort
"beep-beep-beep".
6.2 Present Card with Pin Code
If the entrance need to input pin code after the card presented, the proximity card
reader's LED light will hold on 5 seconds to green color, user should key in 4 digits
pin code through the keypad. If the pin code is correct, the proximity card reader will
sound a long "beep". Then the door lock will be released with a certain time defined
by supervisor. Otherwise, the proximity card reader will sound three sort
"beep-beep-beep" for "WRONG CODE". For security reason, this operation can only
be tried 7 times. After than access right will be terminated for this card only.
6.3 Single Pin Code Entry Only
At this operation mode, users can key in the card number through keypad instead of
card
operation. Press "#" key will enable this function if this operation is set. If
user are allowed to entry the area by using Key Operation, the proximity card reader's
LED light will hold on 5 seconds to green color, user should key in 8 digits card
number assigned to the user. If the entrance is permitted, the proximity card reader
will sound a long "beep". Then the door lock will be released with a certain time
defined by supervisor. If prohibited, the proximity card reader will sound three sort
"beep-beep-beep".
6.4 Double Pin Code Entry Only
At this operation mode, user can key in the card number and pin code through keypad
instead of card operation. Press "#" key will enable this function if this operation is set.
If user are allowed to entry the area by using Key Operation, the proximity card
reader's LED light will hold on 5 seconds to green color, user should key in 8 digits
card number assigned to the user. If the card number is "ACCEPTED", the proximity
card reader's LED light should still hold more 5 seconds to key in 4 digits pin code. If
the pin code is correct, the proximity card reader will sound a long "beep". Then the
door lock will be released with a certain time defined by supervisor. If prohibited, the