Cd operations, Playback, Random/repeat playback – Aiwa NSX-D70 User Manual

Page 10: 10 en

Advertising
background image

10

En

This unit plays back finalized CD-R/RW discs as well as audio
CDs.

Playback

1 Turn the Dial Function to select the CD function

and load disc(s).
Press zCD OPEN/CLOSE to open the disc compartment
and place one or two disc(s) with the labelled side up.
To place three discs, press DISC CHANGE so that the trays
rotate, then place the third one. Lastly, close the
compartment with zCD OPEN/CLOSE.
• When loading an 8-cm (3-inch) disc, place it on the

inner circle of the tray.

• When pressing zCD OPEN/CLOSE or DISC CHANGE,

the unit switches to the CD from any other functions.

2 To play all discs, press c.

To play one desired disc, press DISC DIRECT
PLAY 1-3.
Tray number being played back flashes.

To stop playback
Press s.

CD OPERATIONS

To pause playback
Press a. Press again to resume playback.

To skip to the beginning of the current/preceding/
succeeding track
Press f or g repeatedly or turn MULTI JOG.

To search (playback in fast forward or fast reverse)
Hold down f or g. Release at the desired point.

To select a disc and a track with the remote control
1 Press CD DIRECT, and then press the numbered button (1-

3) within 3 seconds to select a disc.

2 Press the numbered buttons to select a track.
- To select track 25, press +10, +10 and 5.
- To select track 10, press +10 and 0.

To display the remaining playback time of the CD
Press SHIFT+CD EDIT/CHECK on the remote control. Press
again to return to the elapsed time display.

•Remaining playback time cannot be displayed during

random playback or programmed playback.

To replace disc(s) during playback without
interruption
While one disc is being played back, press DISC CHANGE so
that the compartment opens, replace disc(s) with other one(s),
and press DISC CHANGE to close the compartment.

Random/Repeat playback

Random playback plays all the tracks on one desired disc or all
the discs in random order. Repeat playback plays all the tracks
repeatedly on one desired disc or all the discs.

1 Press SHIFT+RANDOM/REPEAT repeatedly on

the remote control to select one of the following
modes:
- Random playback: "RANDOM" lights up.
- Repeat playback: """ lights up.

- Random and repeat playback: "RANDOM" and """

lights up.

2 To play one desired disc, press DISC DIRECT

PLAY 1-3.
To play all discs, press c.

To cancel random/repeat playback
Press SHIFT+RANDOM/REPEAT repeatedly on the remote
control so that both "RANDOM" and """ disappear on

the display.

To repeat a selected set of tracks
Select the tracks with programmed playback, then press
SHIFT+RANDOM/REPEAT on the remote control to select
repeat playback.

• It is impossible to play a selected set of tracks in random

order.

Advertising