Aiwa NSX-D70 - Manual (Page 12)

12
En
RADIO OPERATIONS
Manual tuning
1 Turn the Dial Function to select the TUNER
function.
2 Press BAND to select a band (FM or AM).
3 Press f or g to tune in to a station.
"TUNE" is displayed when a station is tuned in.
"1" lights up for FM stereo reception.
To search for a station automatically (Auto Search)
Hold down f or g.
The unit searches for a station up or down the band and stops
at reception.
To stop the search manually, press f or g.
•Auto Search may not stop at stations with weak signals.
Preset tuning
Preset your favorite stations and tune them in directly by using
preset numbers.
Presetting stations
1 Turn the Dial Function to select the TUNER
function and press BAND to select a band.
2 Press f or g to tune in to the desired
station.
3 Press aSET to store the station.
The preset number, beginning from "1", appears on the
display.
4 Repeat step 1 to 3 to preset other stations.
•You cannot store more than a total of 32 preset stations.
"FULL" is displayed.
Tuning in to preset stations
On the unit
1 Turn the Dial Function to select the TUNER
function and press BAND to select a band.
2 Press c repeatedly or turn MULTI JOG.
With each press, the station with the succeeding preset
number is tuned in.
On the remote control
1 Press FUNCTION repeatedly to select the TUNER
function and press BAND to select a band.
2 Press the numbered buttons for the preset
number of your desired station.
- To select preset number 20, press +10, +10 and 0.
- To select preset number 15, press +10 and 5.
•Pressing PRESET N , M or c repeatedly can
also select the preset number.
To clear a preset station
1 Tune in to the station by preset tuning.
2 Press sCLEAR, then press aSET within 4 seconds.
Preset numbers of preset stations in the band with higher
numbers decrease by one.