Aiwa NSX-D70 - Manual (Page 17)

17
En
SOUND ADJUSTMENTS
Graphic equalizer
Selects a sound equalization curve to match the music type.
Press MODE once and then turn MULTI JOG within
4 seconds to select one of the four equalization
curves.
On the remote control, press GEQ and then press PRESET
N or M repeatedly within 4 seconds.
- ROCK: Powerful sound emphasizing treble and bass
- POP: More presence in the vocals and midrange
- JAZZ: Accented lower frequencies for jazz-type music.
- USER: A customized curve (see "Setting a curve manually")
To display the current GEQ mode
Press MODE (GEQ on the remote control) once.
The mode will be displayed for 4 seconds.
To cancel equalization
Press MODE once and then turn MULTI JOG within 4 seconds
to select "GEQ OFF".
On the remote control, press GEQ and then within 4 seconds
press PRESET Nor M repeatedly until "GEQ OFF" is
displayed.
Setting a curve manually
The equalization curve can be customized to suit your
preference.
1 Press SOUND repeatedly to select one of the three
frequency ranges to adjust.
- BASS: Low range frequencies
- MID: Middle range frequencies
- TRE: High range frequencies
2 Turn MULTI JOG (press PRESET N or M on
the remote control) to adjust the level within 4
seconds.
3 Repeat Step 1 and 2 to adjust all the three ranges
if necessary.
If you want to store your customized curve, proceed to
the next step.
4 Hold down MODE (GEQ on the remote control)
until "PRESET" flashes in the display and then
press ENTER within 4 seconds.
The customized curve is stored in "USER"
•If you select one of the preset curves such as ROCK before
performing STEP 1, you can customize a curve on it.
•Once one of the frequency ranges is adjusted, the GEQ
indicator remains displayed until "GEQ OFF" is selected.