SIGMA RC 14.11 - Manual (Page 14)

62 www.sigmasport.com
5 SETTING MODE
5.1 ACTIVATING ThE SETTING MODE
Prerequisite: Your running computer must be in
training mode (see section 4.5 “Overview of modes
and functions”).
Hold down the SET button. The display will flash twice
to indicate that the setting mode is now active.
5.2 DISPLAY SETUP
5.3 BUTTON ASSIGNMENT IN ThE SETTING MODE
1st line SET indicates that the setting mode
is active.
3rd line/ Submenu or the setting to be
4th line changed.
START/STOP
Press: In calibration mode,
start and stop the
measurement
SET
Press: Select function
Save value
Press and hold: Exit setting
mode (in calibration mode,
cancel calibration)
LIGHT
Press:
Light on
PULSE
Press:
Scroll
backward
Press and
hold:
Scroll
continuously
SPEED
Press: Scroll forward
Press and hold: Scroll
continuously