SIGMA RC 14.11 - Manual (Page 15)

63
US/GB
5.4 BRIEF GUIDE TO DEVICE SETTINGS
Device settings such as language, measuring unit, correction factor, gender,
date of birth, weight, max. HR, contrast, log interval, logbook, button tones
and zone alarm are all set in the same manner: Select the device setting,
change the value and save the modified setting.
Prerequisite: Your running computer must be in setting mode (section 5.1).
1 Press the PULSE (-) or SPEED (+) button
repeatedly until you reach the desired device setting.
2 Press the SET button. The device setting value flashes.
3 Press the PULSE (-) or SPEED (+) button
repeatedly until the desired value is displayed.
4 Press the SET button. The new device setting is saved.
You can now scroll to a different device setting.
5 SETTING MODE
5.5 ESTABLIShING DEVICE SETTINGS
5.5.1 SETTING ThE LANGUAGE
5.5.2 SETTING ThE MEASURING UNIT
5.5.4 CORRECTION FACTOR
5.5.3 CALIBRATION
Follow the steps described in section 5.4 “Brief guide to device settings”.
Follow the steps described in section 5.4 “Brief guide to device settings”.
The correction factor is described in a separate section.
See section 6 “Calibration and correction factor”.
The calibration is described in a separate section.
See section 6 “Calibration and correction factor”.