SIGMA RC 14.11 - Manual (Page 37)

85
US/GB
7 TRAINING MODE
7.9 TRAINING VALUES AFTER TRAINING
Prerequisite: You must be in training mode.
After training, you can view the measured values in the training mode
at your leisure. Use the SET, PULSE (-) and SPEED (+) buttons to scroll
through the individual values. In addition to the current training values,
the running computer also shows summed values such as:
k Total running time
k Total distance
k Total calories
Note: Total values are available only when the stopwatch is stopped.
7.10 RESETTING AND SAVING ThE TRAINING VALUES
Before you begin a new training session, you should set the training
values to zero as the running computer will otherwise continue to
count the values. The summed total values for distance, time and
calories remain saved. Resetting the training data to zero automatically
stores it in the logbook.
Prerequisite: You must be in training mode.
Press and hold the START/STOP button. The display
flashes twice and all values are reset. You will then
see the training mode again.