SIGMA RC 14.11 - Manual (Page 25)

73
US/GB
5 SETTING MODE
5.5.19 LOGBOOK
The data stored in the logbook can be deleted here. Data stored in the
logbook can only be viewed using the DATA CENTER 2 software. Deleting
the logbook does not affect any other data. It is only possible to delete
the entire logbook; training units cannot be individually deleted.
To delete the logbook, select the entry “logbook” in setting mode and then
press the SET button. “Cancel” flashes. Press SET again to cancel the
process. Press SPEED (+) to select “Delete”. Confirm the deletion by
pressing the SET button. The logbook has now been irretrievably deleted.
5.5.20 SETTING ThE BUTTON TONES
5.5.21 TURNING ThE zONE ALARM ON AND OFF
Follow the steps described in section 5.4 “Brief guide to device settings”.
Follow the steps described in section 5.4 “Brief guide to device settings”.