Telenav for AT&T Supported Devices: v3.9 Lite for Motorola SLVR L6, L7, RAZR V3i Users Guide - Manual (Page 19)

© TELENAV 2003-2007 PAGE 19 OF 23
Route Type
The different route types available to you are: 1) Fastest, 2) Shortest, 3) Prefer No
Highways, 4) Prefer Highway, and 5) Pedestrian. The default route setting is Fastest.
Your preference here may not reflect the route generated for you, as there are many
variables taken into consideration when a route is generated. Our system is
designed to generate the best possible route depending upon the requirements
given.
Address Input Phone #
There are two Address Input phone numbers to choose from under Voice Number
(#). In some cases, calls placed to the 877 number do not carry your Caller ID. When
this happens, you will be asked to enter your phone number followed by pressing the
“#” key, and then enter your TeleNav PIN followed by pressing the “#” key so that
TeleNav can assign the address you dictate to your account.
If the automated attendant asks for account number in the geographical area where
you most frequently use TeleNav, you should try the 408 number.
Distance Units
There are two different Distance Units settings from which you can select from either
1) Miles/Feet or 2) Kilometers/Meters. The default Distance Units setting is
Miles/Feet.
Activity Messages
Whenever the TeleNav application on your phone needs server assistance, it uses your carrier’s data service. While it
is using data service, other services such as walkie-talkie, SMS 2-way messaging, and conventional cellular will not
be available. Typically, this interruption of other services will last no more than 20 seconds. When TeleNav is using
data service to contact the TeleNav servers, it will present a message like: a) Reading GPS, b) Waiting, c) Sending,
d) Receiving, e) Logging in, f) Personalizing, g) Loading icons, h) Loading audio, and i) Storing audio. Some of these
screens appear earlier in this document.