Telenav main menu, Addresses – Telenav for AT&T Supported Devices: v3.9 Lite for Motorola SLVR L6, L7, RAZR V3i Users Guide User Manual
Page 7
© TELENAV 2003-2007
PAGE 7 OF 23
After you see this advisory alert, your phone will ask you
if it is OK to allow TeleNav to use the network. The
correct choice is “Yes, Always Grant Access.” Highlight
this row and press the button in the center of the
navigation key to mark the selection. Then press the OK
option key.
During your first use of TeleNav, the handset will
download the audible and graphical content needed to
build displays and produce audible messages. The alert
screens similar to those shown below advise you that
this is taking place.
From time to time, TeleNav may update audible or graphical content and will advise you accordingly.
NOTE:
Do not interact with the phone while this download is underway. Wait for it to finish. When the download is
completed, you will see the TeleNav Home Menu.
NOTE:
If after you press OK and the TeleNav application indicates that it cannot reach the TeleNav servers, the
most likely reason is that your data service plan is not yet active.
NOTE:
If your TeleNav account is not active, you will be notified at this point and will be directed to go to
to extend your service agreement. You will not be able to progress beyond this point until your
account is returned to current status. You may also see an important message from TeleNav regarding upgrades,
scheduled downtime, pending account expiration, etc.
When the handheld reaches the TeleNav servers with a valid and active phone number and PIN, the handheld will be
registered to use TeleNav and will not present any of the above screens except the splash screen in the future.
Visiti
and changing the PIN will require you to repeat the above registration process.
TeleNav Main Menu
To begin, highlight your choice and press OK.
You EXIT TeleNav from this menu screen. If you are elsewhere in the
TeleNav application, press BACK until you see this screen. To avoid
inadvertently leaving TeleNav, you must confirm your desire to exit by
pressing YES on the exit confirmation screen.
6. Addresses
This section discusses the variety of ways you can select a previously entered address, enter a new one, or use a
Business or Airport Address. This information is presented here since the techniques for setting addresses are used
throughout TeleNav.