Address validation, Voice address input – Telenav for AT&T Supported Devices: v3.9 Lite for Motorola SLVR L6, L7, RAZR V3i Users Guide User Manual
Page 9
© TELENAV 2003-2007
PAGE 9 OF 23
Address Validation
Once you have entered the street address or selected the crossing street name,
TeleNav will check to see if the address you entered can be found. This checking
makes sure that: a) the address (door) number you entered is within the range of
assigned numbers for the named street, and b) when crossing street names are
provided, the streets do actually cross. If either condition is false, or the address is
too new to be found in the mapping database, the server will send a message to
your handheld requesting you to correct the provided information.
Voice Address Input
The auto voice entry system in TeleNav can be utilized two different ways:
1) before starting TeleNav, call the Voice Address Input System at 408-523-1429 or
877-886-9762 and dictate your address as prompted, or 2) select the Call in
Address option on the Destination address entry screen as shown to the right. After
you have entered the address, end the call and launch TeleNav. Then Refresh your
Recent Addresses list to find the address.
Below is a sample of what you will hear and say:
TeleNav prompt> Welcome to TeleNav! Let’s get your destination. Is it a street address, an
intersection, or an airport?
Your response> Street Address
TeleNav prompt> OK, Tell me the 5 digit ZIP code, or the city and state, like Los Angeles,
California.
Your response> Arlington, Texas
TeleNav prompt> I heard Arlington, Texas. Say GO BACK if this is not correct. <pause> Say the
street including both the number and name, like 422 Main Street. <pause> It can also be a
highway.
Your response> 1620 Oak Street
TeleNav prompt> I heard 1620 Oak Street. Say GO BACK if this is not correct. <pause> Great, your
destination has been entered: 1620 Oak Street, Arlington, Texas 75210. Would you like to enter
another?