AltiGen comm 705 - Manual (Page 36)

28 IP 705 Manual
• DND - do not disturb
• FWD - forwarding
The area is blank if the agent is in any other state.
When a call rings the agent or when the agent is making an outgoing call,
the second line of the LCD is changed to Caller ID or dialed digits display,
and the first line stays the same. However, when more than one call is
outstanding, the first line shows the Call n/n display.
Basic Phone Operation
* Indicates a normal operating mode phone feature, which is available only after
registering the IP 705 with the phone server and logging in as an extension.
FUNCTION KEY SEQUENCE
Auto Answer 1) Press the Menu button, select PHONE SETTING, then
select AUTO ANSWER.
2) Use the / buttons to enable/disable Auto Answer mode,
and press Enter.
3) Select AUTO ANS RING from the menu.
4) Set the number of seconds to ring before auto answer (1-20),
and press Enter.
5) Select AUTO ANS DEV from the menu, then select from
speaker or headset as the Auto Answer device, and press
Enter.
Call Log* 1) With the phone onhook, press the Call Log button.
2) Use the / buttons to scroll to the number you want.
3) Press the Enter button to dial the number.
The Call Log stores up to 99 incoming numbers.