AltiGen comm 705 - Manual (Page 38)

30 IP 705 Manual
Handset/
Headset/
Speaker To switch between handset, headset and speaker, the user can
go offhook, or press the appropriate programmable key if it is
configured for headset or press the Speaker button.
Hold* During a call:
1) Press the Hold button to put the current call on hold and
make a new call.
To retrieve a single call on hold:
1) Press the Hold button.
To retrieve multiple calls on hold:
1) Use / to select a hold call to be retrieved.
2) Press the Enter button.
OR
1) Press the Hold button to retrieve the last hold call.
Line Park During a call:
1) Press #51 and then enter the 2-digit Line Park line.
OR, press the Line Park key (if the administrator has
configured one). The Line Park key’s light will be lit and
turns off when the parked call is picked up, the caller hangs
up, or the call is routed to voice mail.
Mute While on a call with speaker, handset, or headset on:
1) Press the Mute button.
2) To disengage mute, press the Mute button again.
Program Key 1) Press the Menu button.
2) Select PHONE SETTING, then PROGRAM KEYS, then the
desired program key.
3) Enter the appropriate digits for the speed dial number or
feature code.
Reboot 1) Press * * 3, then the Enter button
Redial Phone is onhook
1) Press the Redial button.
2) Use / to scroll to the desired entry. ( scrolls to previous
entry, scrolls to first entry.)
3) Press the Speaker button or raise handset.
• Redial up to last 16 calls.
• Redial up to 32 digits.
Release For a connected call:
1) Press the Release button to hang up the call.
Also, press the Release button to exit the menu.