Monoprice PID 8742 Wireless 802 11N Router with Internal Antenna and WPS Function 2T2R MIMO 300Mbps - Manual (Page 24)

19
should be, contact your local ISP for assistance.
All the above values are provided by your ISP.
L2TP

Mode: Shows your current connection mode.

L2TP server address: The IP address or domain name of the destination server,
used to specify the destination address, which is needed for a L2TP connection.

Username/Password: Used to log in to the L2TP server.

Address mode: Set the router's IP address mode, you can select either Dynamic or
Static. If your ISP doesn't provide a fixed IP address, please select Dynamic.

IP address: Enter the IP address provided by your ISP. If you are unsure of what this
should be, contact your local ISP for assistance.

Subnet mask: Enter the subnet mask provided by your ISP, usually it is
255.255.255.0

Gateway: Enter the gateway provided by your ISP. If you are unsure of what this
should be, contact your local ISP for assistance.
All the above values are provided by your ISP.
4.3 LAN Settings