Monoprice PID 8742 Wireless 802 11N Router with Internal Antenna and WPS Function 2T2R MIMO 300Mbps - Manual (Page 27)

22

Primary DNS address: Enter the necessary DNS address provided by your ISP.

Alternate DNS address: Enter the secondary DNS address if your ISP provides one
(this is optional).
NOTE:
After the settings are completed, reboot the router to activate the modified settings.
4.6 WAN Medium Type
Click Advanced settings > WAN medium type to configure the type of WAN the router
will utilize (wired or wireless).

Wired WAN: In this mode, the cable is directly connected to the WAN port. Wired
WAN is the default mode.

Wireless WAN: Enable this mode if your ISP provides you a wireless connection