Monoprice PID 8742 Wireless 802 11N Router with Internal Antenna and WPS Function 2T2R MIMO 300Mbps - Manual (Page 59)

54
Chapter 9 Routing Settings
9.1 Routing Table
This page shows the router's core routing table.
The main duty of a router is to look for the best path for every data packet and transfer that
data packet to its destination station. To fulfill this function, many transferring paths, i.e.
routing table, are saved in the router, for use when needed.
9.2 Static Routing
This screen is used to set the router's static routing. A static route is a pre-determined
pathway that network information must travel to reach a specific host or network.

Destination network IP address: The destination host or IP segment you visit.

Subnet mask: Enter the subnet mask, which is usually 255.255.255.0