Racing Electronics SC200 - Manual (Page 13)

1. LCD DISPLAY — The liquid crystal display (LCD)
shows the current channel and frequency. It also
displays the mode, status, and bank indicators.
A. Priority Channel Indicator — P appears when
the scanner stops on a Priority Channel.
B. Channel Number — Indicates the current
channel that the scanner is on.
C. Memory Bank Numbers — Each Memory Bank
consists of 20 channels that you can select or
deselect during scanning operation, using the
numeric keypad. When you select a Bank, its
number appears on the display. When you
deselect a Bank, its number disappears from the
display. When you press
to stop
scanning, only the Bank of the current channel
appears.
D. Bank Indicator — Appears with the Bank
Numbers (1~10).
E. Frequency Indicator — Indicates the frequency
being received by the scanner, or Alpha Name,
etc.
F. Low Battery Indicator — Appears on the
display when the Battery Pack is low and needs
recharging.
G. Mode/Function Indicators — (Only the active
mode(s)/function(s) are displayed during
operation.)
SCAN Indicates SCAN and WEATHER
SCAN HOLD.
SEARCH Indicates SEARCH Mode. Flashes
when in TURBO SEARCH Mode.
PRIORITY Indicates PRIORITY SCAN is
activated.
HOLD Indicates MANUAL and WEATHER
SCAN HOLD or SEARCH HOLD
Mode.
DELAY Indicates DELAY is activated.
L/O In MANUAL Mode, indicates the
channel shown is “Locked Out”.
In SEARCH HOLD Mode, indicates
the frequency shown is “Locked
Out”.
WX Indicates WEATHER SCAN Mode.
11