Racing Electronics SC200 - Manual (Page 44)

NOTE: The number preprogrammed into your scanner for
downloading frequencies is 1-900-225-4822. There is a $0.99
per minute charge for using the SmartScan database.
The frequencies in the SmartScan database are updated, at a
minimum, every 6 to 12 months. To get current frequencies, as
well as special /sporting event frequencies, regularly update
your scanner by using SmartScan.
NOTE: If you are unable to dial a “900” number, check with
your local phone company to find out if you have a “900” block
on your phone line. This will prevent you from dialing to the
server.
Menu for SmartScan
Press key, Prog Lock appears in the display. And
you can change several parameters used for SmartScan
whenever you press
.
Ÿ Transfer speed 300, 1200, 2400, (9600), 14400 bps
Ÿ Flow control setting (Xon/Xoff), RTS/CTS, Off
Ÿ
Dial type (TONE), PULSE
Program Lock
SmartScanner will overwrite frequencies that you have
already programmed into your scanner. To save the
previously programmed frequencies, you can lock out
specific banks prior to calling the database as follows:
1. After you enter your zip code, press .
2. With the phone number on the display, press .
appears in the display.
3. Press the bank numbers using the 1-9 and 0 key (for
bank 10) that you wish to lock out from programming so
that they will not be overwritten during the download.
4. Press again. The zip code is displayed.
42