Vaisala Spectrum 4.0 - Manual (Page 2)

Copyright
Copyright
© 2010 Veriteq Instruments, Inc. All rights reserved.
No copying, distribution, publication, modification, or incorporation of this document, in whole or part, is permitted
for commercial purposes without the express written permission of Veriteq Instruments.
Veriteq, a Vaisala company
13775 Commerce Parkway
Richmond, BC V6V 2V4
Canada
Trademarks
Veriteq Instruments, Veriteq, and Veriteq Spectrum are trademarks of Veriteq Instruments.
Windows is a registered trademark of Microsoft Corporation.
All other trademarks referred to are the property of their respective owners.
Disclaimer and Limitation of Liability
Veriteq Instruments, Inc. and its subsidiaries assume no responsibility for any damage or loss resulting from the
use of this manual.
Veriteq Instruments, Inc. and its subsidiaries assume no responsibility for any loss or claims by third parties which
may arise through the use of this software. Veriteq Instruments, Inc. and its subsidiaries assume no responsibility
for any damage or loss caused by deletion of data as a result of hardware malfunction. Be sure to make backup
copies of all important data to protect against data loss.
Veriteq Instruments, Inc. makes no warranties, either expressed or implied, regarding Veriteq data loggers or soft-
ware, its merchantability, or its fitness for any particular purpose. The exclusion of implied warranties is not per-
mitted by some states. As such, the exclusion may not apply to you.
Veriteq Spectrum has been tested using a variety of network systems. However, the large number of possible
hardware and network configurations makes testing under every circumstance impossible. If you have trouble us-
ing Veriteq Spectrum software, contact Veriteq Instruments.
Technical Support
Call Veriteq for free technical support 1-866-861-3388 (8am-4pm Pacific Standard Time)
Email [email protected]
Document part number: 880-0100-00
Release date: July 2010
.