Vaisala Spectrum 4.0 - Manual (Page 44)

Transferring Logger Files
38
This starts the communications process between the logger and the PC and
opens the Transfer Wizard window.
5. Confirm that the current date and time shown in the window are correct. If
the date and time are not correct, use the Windows Control Panel to update
the system and time. See Setting System Date and Time on page 41.
Note: The PC's date and time must be correct when setting up a data logger, or
transferring logger data. Otherwise, the timestamp in the Logger file is
incorrect.
6. Click Next.
7. Edit or confirm the description of the logger using a maximum of 40 char-
acters. The default entry for this field draws from the existing Description
in the logger’s memory (maximum 16 characters, see Configuring Data
Loggers on page 18). You can accept the default, or use the extra characters
to further describe the application or location of the data logger.