Vaisala Spectrum 4.0 - Manual (Page 24)

Getting Started
18
2. In Spectrum, choose Tools>Options, then choose the General tab.
3. From the COM port drop-down list, select an available COM port.
4. Click OK.
Once you have selected a COM port, you do not need to change the setting un-
less you change the communication port your loggers are connected to.
Configuring Data Loggers
Setting up the data logger varies slightly depending on the data logger you are
using and the configuration options you prefer.
To configure data loggers:
1. If you have not already done so, connect the logger to the PC.
2. From Spectrum, do one of the following:
• Select Logger>Setup.
• Press F11.
• Click the Logger Setup toolbar button ( ).