Vaisala Spectrum 4.0 - Manual (Page 38)

Getting Started
32
7. Click OK to save or cancel to close without saving.
Clearing Logger Samples
Clearing a logger deletes all recorded samples in a logger’s memory.
You can clear the data logger without making any setup changes, or as an es-
sential part of the following logger setup functions:
• Enabling or disabling channels
• Changing Start Mode settings
• Changing logger sample intervals
Note: You do not have to clear the data logger samples before you start a new
logging session, but doing so minimizes the storage of unneeded infor-
mation.
To clear the logger without changing the logger setup:
1. Select Logger>Clear....
2. In the Confirm System Time window, check the system time.
If the time shown is correct, click OK.
If the time shown is incorrect, click Cancel, and then use the Windows
Control Panel to make the appropriate changes. See Setting System Date
and Time on page 41.
Note: The PC's date and time must be accurate when clearing a data log-
ger’s memory or the date and time values in future logger files may
be incorrect.
After you click OK, a confirmation window opens.
3. Click OK.