Vaisala vLog 4.5 - Manual (Page 44)

Configuring Loggers
38 © 2011 Vaisala Canada Inc
To change the sample interval on the currently-connected log-
ger:
1
Select Logger | Sample Timing .
2 Under Sample Interval , use the drop-down lists to set the
Days , Hours , Minutes , and Seconds to the desired sample
interval. If you want to use a sample interval of once per
minute, click
Default . You can choose intervals ranging
from a minimum of ten seconds to once every 24 hours
(with the exception of the VL-1000-VLT, VL-1200 and
models SP-1016, SP-1200, SP-1416, VL-1016, VL-1416,
which have minimum sample intervals of one minute).
The total period covered by a logger before the memory
is full depends on how many channels are enabled and
the sample interval setting. This information is
automatically calculated in the
Log Time section of the
Logger Sample Timing window.
Note: Running the logger with a sample interval
shorter than one minute for a prolonged time
shortens the battery life.