Vaisala vLog 4.5 - Manual (Page 52)

Configuring Loggers: Batch Setup (vLog VL)
46 © 2011 Vaisala Canada Inc
Configuring Loggers: Batch Setup (vLog VL)
Before using this section, read “Configuring Loggers” on
page 26, as you need to have an understanding of the
settings and choices you will make before using Batch Setup.
Batch Setup, available in vLog VL, allows you to quickly
configure several loggers with very similar settings. For
example, using Batch Setup, you can quickly apply identical
logger sample settings to all loggers in your environment.
To set up the first logger in a batch:
1
Ensure a logger is connected to your PC.
2 Choose Logger | Batch Setup .
3 Optional: Click Refresh to update the COM port list with
available ports.
4 From the Logger Batch Setup window, choose the COM
port your logger is communicating with and specify the
number of COM ports in the range of your batch setup.
(For example: If setting up loggers on COM ports 2, 4,
and 6, the number of COM ports selected should read 5,
not 3.)