Summers Disk-Chisel - Manual (Page 34)

FOLD & TRANS REST 5/20/2013 9DC4012.iam/
8T3300
8T3800
8T3800
8X0316
1" FW
8X0282
8K5515
3/4 X 4 X 6"
8X0306
3/4" LW
8X0260
3/4" N
8X0432
CLVS PIN
8X0402
8T4300
8T4315
8K9650
q
(36' -40')
(32') 8K9640
SECTION 2 – SET-UP OF DISK-CHISEL & COULTER-CHISEL CENTER SECTION (32’-40’)
2-22
11. Insert 1-1/2 x 10-3/8” eyebolts into wing lift cylinder attach base.
– Leave 1-1/2” nuts loose, they will need to be adjusted after wing is installed.
12. Attach wing lift cylinders to frame with pins and roll pins.
– 32’ machine uses 4 x 36” cylinders (8K9640).
– 36’ & 40’ machines use 5 x 36” cylinders (8K9650).