Summers Disk-Chisel - Manual (Page 93)

3-9
SECTION 3 – OPERATION
6. Leveling machine from front to back. 16’ through 28’: Adjust hitch height to level machine at working
depth. 32’-40’: With machine still in the ground, check depth of tillage in the front and the back.
If leveling is necessary, use wrenches provided to adjust eyebolts on front wheel assemblies up
or down.
If Coulter gangs are supporting front weight of implement, adjusting the front wheels will not level
the machine. In this case, adjust depth of coulter gangs to level machine.
NOTE: It is best to check levelness after each adjustment by working test strips within the
field.
IMPORTANT!
Pressure must be removed from cylinders before adjusting eyebolts. Rest machine on
top of the ground. Shut tractor off and relieve pressure.