Decals/safety lights, Decals/safety light kit/options -31 – Summers Superchisel - 5-Section User Manual
Page 43
2-31
SECTION 2 – DECALS/SAFETY LIGHT KIT/OPTIONS
1. Install danger, warning and caution decals.
– Part numbers can be found on the lower right hand corner of each decal. Match this number
with decal location drawing on Page 1-6.
– The drawing gives approximate locations of decals. Decals must be clearly visible.
– Order replacement decals if any are damaged.
2. Install reflectors.
– Attach Amber reflectors (8Z0800) on front corners and sides of machine in transport posi-
tion.
– Attach Red-orange reflectors (8Z0805) on outside back of machine in transport position.
– Attach Red reflectors (8Z0810) on outside back of machine in transport position.
3. Install Safety Light Kit as shown on page 6-9.
OPTIONS
See Parts Section for layout of Optional Mounted Harrows and Rear Hitch.