Agilent Technologies U2781A - Manual (Page 19)

Getting Started 1
U2781A User’s Guide 7
General Maintenance
To remove the dirt or moisture in the chassis panel, the cleaning
steps are as follows:
1 Power off the chassis device and remove the power cord and I/O
cable from the chassis.
2 Shake out any dirt that may have accumulated inside the
chassis device.
3 Wipe the chassis with a dry cloth.
N O T E
Repair or service which are not covered in this manual should only be performed by
qualified personnel.
U2781A UG.book Page 7 Friday, November 25, 2011 10:51 AM