Agilent Technologies U2781A - Manual (Page 30)

18 U2781A User’s Guide
2 Features and Functions
Single Master–multiple Slaves
In this configuration, only one Master module is allowed to
send the SSI trigger event to the receiving Slave modules.
Configuration with Agilent U2300A, U2500A, and U2600A Series
DAQ only
When there is one or more U2300A, U2500A, or U2600A
Series DAQ in the SSI configuration, SSI allows users to set
only one of the modules as MASTER and others as SLAVE
through AMM. Alternatively, users can also set this
configuration using the SCPI commands.
Figure 2-5 Single Master–multiple Slave triggering with DAQ
N O T E
Refer to U2300A, U2500A, and U2600A Series DAQ Programmer's
Reference.
U2781A UG.book Page 18 Friday, November 25, 2011 10:51 AM