Agilent Technologies U2781A - Manual (Page 3)

U2781A User’s Guide III
Safety Information
The following general safety precautions must be observed during all phases of
this instrument. Failure to comply with these precautions or with specific
warnings elsewhere in this manual violates safety standards of design,
manufacture, and intended use of the instrument. Agilent Technologies, Inc.
assumes no liability for the customer’s failure to comply with these requirements.
Safety Symbols
The following symbols indicate that precautions must be taken to maintain safe
operation of the instrument.
Regulatory Markings
Direct current
Warning
The CE mark shows that the product complies with all the
relevant European Legal Directives (if accompanied by a year, it
signifies when the design was proven).
The CSA mark is a registered trademark of the Canadian
Standards Association. A CSA mark with the indicators "C" and
"US" means that the product is certified for both the U.S. and
Canadian markets, to the applicable American and Canadian
standards.
The C-tick mark is a registered trademark of the Spectrum
Management Agency of Australia. This signifies compliance with
the Australian EMC Framework regulations under the terms of
the Radio Communications Act of 1992.
ICES/NMB-001 This ISM device complies with the Canadian ICES-001.
U2781A UG.book Page III Friday, November 25, 2011 10:51 AM